HP t100 Maintenance And Service Manual page 191

Sound from headphones is not clear or muffled.
Cause
Headphones are plugged into the rear audio output
connector. The rear audio output connector is for powered
audio devices and is not designed for headphone use.
Computer appears to be locked up while recording audio.
Cause
The hard disk may be full.
Line-in jack is not functioning properly.
Cause
Jack has been reconfigured in the audio driver or application
software.
Headphone/Microphone jack on the front of the computer is not functioning properly.
Cause
Jack has been reconfigured in the audio driver or application
software.
Solution
Plug the headphones into the headphone connector on the
front of the computer.
Solution
Before recording, make sure there is enough free space on the
hard disk. You can also try recording the audio file in a
compressed format.
Solution
In the audio driver or application software, reconfigure the
jack or set the jack to its default value.
Solution
In the audio driver or application software, reconfigure the
jack or set the jack to its default value.
Solving Audio Problems
181