Add Client Access Licenses - HP t100 Maintenance And Service Manual

Add Client Access Licenses

Every station that connects to a MultiPoint Server system, including a host computer that is used as a
station, must have a valid client access license (CAL). The Add Client Access License wizard allows you
to add as many CALs as you need for your MultiPoint Server system, up to the maximum number of
CALs specified in your agreement with Microsoft.
You can add CALs available to you under different license programs, depending upon your agreement
with Microsoft. Select the CAL you want to add from one of the following options:
● Product key. The product key required to add the CAL is provided with the MultiPoint Server
station hub.
● Open license. The information required to add the CAL consists of the authorization and license
numbers located on the header of your order confirmation.
● Other volume licensing programs. The information required to add the CAL consists of the
agreement or enrollment number found on your signed agreement form.
To add client access licenses (CALs)
1. In MultiPoint Manager, click the System tab.
2. Click Add client access licenses. The Install Client Access Licenses wizard starts.
3. Select the type of CAL that you want to add, and then click Next.
4.
The next page that displays is customized for the type of CAL that you selected. Type the required
information and the number of CALS that you want to add, and then click Next.
5. On the License Installed page, click Finish.
138 Appendix F Managing the MultiPoint Server System