Error Code/Message Tables - Lexmark Optra E 4026-0 Series Reference Handbook

Error Code/Message Tables

Service Error Codes
Error Symptom or Message
900 Unrecoverable Software
Error
920 Fuser Error, Fuser lamps do
not come on during POR, or
922
fuser lamps come on but do
not reach operating
temperature after 180
seconds.
923 Fuser Error, Fuser is too hot
or warming up abnormally.
924 Fuser Error, Wrong voltage
927 Fan stalled
931 Printhead Errors
932
933
934
935 Printhead Error
938 Paper Deck Option Card, No
response
6-6
Laser Printer Reference Handbook
Action
Refer to the operator manual
Refer to the "Fuser (Temperature
Low) Service Check (920/922)" in
the Service Manual.
Refer to the "Fuser (Abnormal
Temperature) Service Check
(923)" in the Service Manual.
Refer to the "Fuser (Wrong Type)
Service Check (924)" in the
Service Manual.
Refer to the "Fan Motor Service
Check (927) in the Service
Manual.
Check the printhead connectors.
Replace the printhead if
necessary. If you still have a
failure, replace the system board).
If the main motor (MT1) runs
during POR, replace the
printhead. If the motor does not
run during POR, check the
connectors to the motor.
If necessary, replace the motor
and POR the machine. If you still
have a failure, replace the system
board.
Check all connectors on the paper
deck board and be sure all doors
are securely closed. POR the
machine. If you still have a failure,
replace the paper deck option
controller card. If you still have a
failure, replace the paper deck
driver board.