Attaching The Optional Arm - Eizo FlexScan EV2460 User Manual

Attaching the Optional Arm

This product can be replaced with another arm or stand by removing the stand part
Attachable Arms and Stands
The attachable arms and stands are as follows.
EIZO products
Other manufacturer's
products
Installation Conditions
The possible installation directions and tilt angle ranges are as follows.
When used between 5° to 45° downward
When installing the monitor on a wall or suspended from the ceiling facing downward from 5° to 45°, be sure to
install the "edge support" to the monitor unit. If you use the monitor without installing the edge support, the front
panel surface of the monitor may come off. Also, it will not be covered by the product warranty. For how to install
the edge support, refer to page 6. Some models don't come with an edge support. When you need it, please
contact the EIZO group company or distributor in your country or territory.
www.eizoglobal.com/contact/
Wall-mounted
*1 If you purchased the free mount type monitor, the stand is not included.
4
Refer to the EIZO Web site (www.eizoglobal.com).
VESA standard compliant arms or stands that meet the following conditions
- Clearance between mounting part screw holes: 100 mm × 100 mm
- Mounting part external dimensions: 122 mm × 122 mm or smaller
- Plate thickness: 2.6 mm
- Weight tolerance: Strong enough to support the weight of the monitor unit and
attachments such as cables.
Orientation
Installation method
Ceiling-mounted
Between 45° upward to 45° downward
Arm-mounted
*1 .
Tilt angle
-45° 45°
Tilt angle
-45°
-5°
Between 5° to 45° downward