To Change The Exiting Method From The Power Saving Mode; Audio Output - Eizo Foris FS2434-BK User Manual

●

To change the exiting method from the power saving mode

Change the method of exiting from the power saving mode in the following cases.
• To reduce the time for exiting from the power saving mode
• The screen is not displayed when a signal is input to the monitor.
• The monitor does not change to the power saving mode.
Procedure
1. Press
2. Press
The exiting method changes and the monitor power is turned on.
Attention
• After the exiting method is changed, the power consumption during the power saving mode increases slightly.
In addition, "*" is displayed on the menu title of "Information" of the Setting menu (see
Information" (page
●

Audio Output

This monitor allows you to turn off the audio output from the speakers/headphone at the power saving
mode.
Procedure
1. Choose "Sound" in the Setting menu, and press
2. Choose "Power Save" in the "Sound" menu, and press
The "Power Save" menu appears.
3. Select "Sound On" or "Sound Off" with
4. Press
Attention
• No audio is output while the monitor is in the Power Saving mode, if the HDMI signal is input or the sound
source is of HDMI.
• Audio output is suppressed when all of the following conditions are met:
- Input signal is HDMI.
- The sound source is set to "HDMI" in the "Sound" settings.
- The monitor is switched to the power saving mode.
36
Chapter 5 Power Saving Functions
on the remote control or
on the monitor for five seconds or more.
52)).
to exit the adjustment.
on the monitor to turn OFF the monitor power.
.
.
or .
"8-5. Displaying Monitor