Audio Output; Setting Power Indicator "Power Indicator - Eizo Foris FS2332-BK User Manual

Attention
• When all the conditions below are met, the monitor does not change to the power saving mode even if "Power Save"
is set to "Enable":
- "Power Save" for Sound is set to "Sound On"
- In the mute state
In these cases, reset the mute.
Exiting the power saving mode
If the monitor receives input, it automatically exits the power saving mode and returns to the normal display
mode.
●

Audio Output

This monitor allows you to turn off the audio output from the speakers/headphone at the power saving mode.
Procedure
1. Choose "Sound" in the Setting menu, and press
2. Choose "Power Save" in the "Sound" menu, and press
The "Power Save" menu appears.
3. Select "Sound On" or "Sound Off" with
4. Press to exit the adjustment.
Attention
• No audio is output while the monitor is in the Power Saving mode, if the HDMI signal is input or the sound source is
of HDMI.

4-2. Setting Power Indicator "Power Indicator"

This function allows you to set the power indicator (blue) ON/OFF in the monitor ON condition.
Procedure
1. Choose "Monitor Settings" in the Setting menu, and press
2. Choose "Power Indicator" in the "Monitor Settings" menu, and press
The "Power Indicator" menu appears.
3. Select "Enable" or "Disable" with
4. Press to exit the adjustment.
34
Chapter4PowerSavingFunctions
("To mute the sound temporarily" (page
or
("Audio Output" (page 34))
29))
.
.
or .
.
.
.