Chapter 5 Power Saving Functions; Setting Power Save; Adjusting The Brightness Of Indicator - Eizo Radiforce GX550 Installation Manual

Chapter 5 Power Saving Functions

5-1. Setting Power Save

The monitor can be set to the power saving mode according to the PC status. When the monitor has
shifted to the power saving mode, the images on the screen are not displayed.
Attention
• When not using the monitor, you can turn off the main power supply or disconnect the power plug so that the
power is cut completely.
• Devices connected to the USB upstream port and USB downstream port work when the monitor is in power
saving mode or when the power button of the monitor is Off. Therefore, power consumption of the monitor varies
with connected devices even in the power saving mode.
• Five seconds before the monitor enters the power saving mode, it displays a preliminary message.
Procedure
1. Select "Preferences" of the Adjustment menu, and choose
2. Select "Power Save" from "Preferences", and choose
3. Select "Off", "High", or "Low" with
Setting
Low
High
4. Select after completing the setting.
Power Saving System
The monitor enters the power saving mode after five seconds in connection with the PC setting.
PC
On
Power saving mode
Note
• At DVI signal input : This monitor complies with the "DVI DMPM" standard.
• At DisplayPort signal input : This monitor complies with the "DisplayPort Standard V1.2a".

5-2. Adjusting the Brightness of Indicator

The brightness of the power indicator (green) when the screen is displayed can be set. (By default, the
power indicator lights up upon power-on and is set to 4.)
Setting Range
1 to 7, Off
Procedure
1. Select "Preferences" of the Adjustment menu, and choose
2. Select "Indicator" from "Preferences", and choose
3. Use or for adjustment.
4. Select after completing the setting.
or
Turns down the backlight to the lowest setting. The time until operation stabilizes after
restoring from power saving mode can be reduced.
Turns off the backlight. The power saving effect is the greatest.
Operation mode
Power saving mode
.
.
.
Function
Power
Monitor
indicator
Green
Orange
.
.
Chapter 5 Power Saving Functions
19