Table of Contents
Advertisement
Chapter 5 Power Saving Functions
5-1. Setting Power Save
The monitor can be set to the power saving mode according to the PC status. When the monitor has shifted to the
power saving mode, the images on the screen are not displayed.
Attention
• Turning off the main power switch or unplugging the power cord completely shuts off power supply to the monitor.
• Devices connected to the USB downstream port work even when the monitor is in power saving mode or when the power
button of the monitor is Off. Therefore, power consumption of the monitor varies with connected devices even in the power
saving mode.
• Five seconds before the monitor enters the power saving mode, it displays a preliminary message.
Procedure
1. Select "PowerManager" from the Adjustment menu, and press
2. Select "Power Save" from "PowerManager", and press
3. Select "Off" and either "High" or "Low" with
Setting
High
Low
4. Press
to exit.
Power Saving System
At DVI signal input
This monitor complies with the "DVI DMPM" standard.
At DisplayPort signal input
This monitor complies with the "DisplayPort Standard V1.1a".
The monitor enters the power saving mode after five seconds in connection with the PC setting.
PC
On
Powersavingmode
5-2. Adjusting the Brightness of Indicator
The brightness of the power indicator (green) when the screen is displayed can be set. (The power indicator is set to
light up when the power is switched on, and set to 4 by default.)
Procedure
1. Select "PowerManager" from the Adjustment menu, and press
2. Select "Indicator" from "PowerManager", and press
3. Select the indicator brightness "Off" or in the range from 1 to 7 with
4. Press
to exit.
36
Chapter5PowerSavingFunctions
Turnsoffthebacklight.Thepowersavingeffectisthegreatest.
Turnsdownthebacklighttothelowestsetting.Thetimeuntiltheoperationstabilizesafter
exitingthePowerSavemodenexttimecanbereduced.
Operationmode
Powersavingmode
.
or .
Function
Power
Monitor
indicator
Green
Orange
.
.
.
or
as desired.
Advertisement
Table of Contents
