Configure The Settings Relating To Images And Audio [Camera Setup] - Panasonic WJNT304 - NETWORK INTERFACE UNIT Network Operating Instructions

Configure the settings relating to images and audio
[Camera setup]
The settings relating to JPEG/MPEG-4 images and camera operation can be configured on the "Camera setup"
page.
The "Camera setup" page has 4 tabs of the [JPEG/MPEG-4] tab, the [Camera] tab, [Audio] tab and the [Coaxial
setup] tab.
Configure the settings relating to MPEG-4 image [JPEG/MPEG-4]
Click the [JPEG/MPEG-4] tab on the "Camera setup" page.
Configure the settings relating to MPEG-4 image such as "Max bit rate (per 1 client)", "Image capture size", "Image
quality", etc. in this section. These settings are common among each channel. To configure each channel setting
individually, press [To individual setup] button.
24
[Total bit rate]
Select the total bit rate for data transmission from the
followings.
Unlimited/64 kbps/128 kbps/256 kbps/512 kbps/
1024 kbps/2048 kbps/4096 kbps
Default setting: Unlimited
Notes:
• When selecting "64 kbps", select "OFF" for "Audio
mode" on the "Audio" tab. ( page 29)
• When "64 kbps" or "128 kbps" is selected, do not
carry out the live-transmission of JPEG images and
the FTP periodic transmission simultaneously.
• Even when "Unlimited" is set for "Total bit rate",
image data whose total size is 20 Mpbs or more may
be destroyed during transmission.
• The actual total bit rate may be approx. twice the set
value when MPEG-4 transmission is carried out in
combination with JPEG transmission or FTP trans-
mission.
[CH selection]
Select the channel number of VIDEO IN connector from
the following.
CH1 only/CH1-2/CH1-3/CH1-4
Default setting: CH1-4
Important:
The set values of JPEG setup and MPEG-4 setup
are common among each channel.
I JPEG setup
[Refresh interval (JPEG)]
Select an interval to refresh the displayed JPEG image
from the following.