Settings Overview - Panasonic LJ-SK56A User Manual

9. Settings Overview

Date/Time
Date/Time Display (7-1)
Year
Month/Day
Hour/Minute
Year→Month/Day→Hour/Minute
Each displayed for two seconds.
Returns to normal state
automatically after the display.
Date/Time Setting (7-2)
Year
Month
@
A
B
C D
A
E
Day
F
G
H
F
I
Hour
Minute
Display of Setting
Press the "MENU (ENTER)" to change the
display:
Year→Month→Day→Hour→Minute
Press "DATA (▲)" or "CLOCK (▼)" to
change the selected (i.e. blinking) value.
The new setting values are displayed when
the setting is completed.
Automatic
Automatic
Automatic
3 sec
Automatic
Normal Display
Normal State (6-1)
There are three modes of view: Normal state, Remaining battery
level, and Operation mode.
Press the "DATA (▲)" to change the display mode.
The remaining battery level and operation mode views automatically
return to the normal state after five minutes of inactivity.
Normal state
Displays the current status
Remaining Battery Level
Displays the Status of Battery
Operation Mode
Displays the current mode
[SELF]: Maximum self-
consumption mode
[ProG]: Programmed
charge/discharge time mode
[bu]: Back up mode
[rc]: Remote control mode
[dr]: DRED mode
e.g. Operation mode
In the normal state, you can view the operating status as
follows.
Stopped (Grid-connected)
Stopped via User's command.
If
one second, the system will start the grid
operation.
Stopped (Stand-alone)
Stopped via User's command.
"
If
second, the system will start the stand-
alone operation.
In Operation (Grid-connected)
The system in grid operation display
indicates charge or discharge power.
If "ON/OFF (CANCEL)" is pressed for
one second, the system will stop.
Inspection Notice
System shows the Inspection notice.
Period until inspection added.
(See 10-3)
The system in stand-alone operation,
In Operation (Stand-alone)
indicates output power and
If
one second, the system will stop.
Error
The system has abnormally stopped
and indicates error mode (F/H/U/P/E)
and code.
" "
ON/OFF (CANCEL) is pressed for
"
PF will display.
" "
ON/OFF (CANCEL) is pressed for one
" "
PF .
" "
ON/OFF (CANCEL) is pressed for
1 sec
* Make sure
that the
system is
not in
operation.
1 sec