Panasonic WJNT304 - NETWORK INTERFACE UNIT Network Operating Instructions page 5

About the "Live" page
q [Setup] button
w [Live] button
e [1] to [4] buttons
r Multi-screen buttons
t Image type buttons
y AUX buttons
u [B/W] button
q
[Setup] button (*1)
Click this button to display the setup menu. The but-
ton will turn green and the setup menu will be dis-
played.
w
[Live] button
The button will turn green and the "Live" page will be
displayed.
e
[1] to [4] buttons
Click this button to display the "Live" page. The but-
ton will turn green and the "Live" page will be dis-
played. It is possible to select a desired channel by
clicking the [1] to [4] buttons.
r
Multi-screen buttons
Images from multiple cameras can be displayed on
a multi-screen by registering cameras on the setup
menu. ( page 8)
!5 Alarm occurrence indication button
!4 Unit title
i ZOOM buttons !0 AUTO MODE
o FOCUS buttons
!1 Control pad/buttons
t Image type buttons
: The letters "MPEG-4" on the button will
turn green and an MPEG-4 image will be
displayed. When "OFF" is selected for
"MPEG-4 transmission" on the setup
menu, the [MPEG-4] button will not be dis-
played. ( page 25)
: The letters "JPEG" on the button will turn
green and JPEG image will be displayed.
y AUX buttons (*2)
Select 1 (AUX1) to (AUX3) from the pull-down menu
and click the [OPEN/CLOSE] button.
AUX1 and AUX2 are auxiliary outputs of camera.
AUX3 is the auxiliary output from the AUX 1 terminal
of this unit.
: The AUX connector will open.
: The AUX connector will close.
!6 Mic input button
!7 Audio output button
!8 One shot button
!9 Time and date
@0 Main area
!2 BRIGHTNESS buttons
!3 PRESET
5