Panasonic WJNT304 - NETWORK INTERFACE UNIT Network Operating Instructions page 55

Symptom
The image is not being
refreshed.
The camera does not move
onto the preset position
exactly.
No image is displayed (or too
dark).
Images are displayed
washed out.
Cannot adjust the focus cor-
rectly.
Flicker appears on the
screen.
Cause/solution
• Depending on the version of your browser, there
might be difficulties refreshing the picture and operat-
ing the unit.
It is recommended to use Internet Explorer
®
When using Windows 2000, it is recommended to
®
use Internet Explorer 6.0 SP1.
• Depending on the traffic of the network or the concen-
tration of access to the unit, there might be difficulties
displaying the camera picture. Click the reload button
of the browser to request the camera picture to be
refreshed.
• When the camera position is moved from the preset
position after turning on the power of the camera,
execute the refresh position function from the
[Initialization] tab of the "Maintenance" page.
• Is any part of the camera worn out?
When the camera does not move to the exact position
frequently, the driving parts may be worn out. Contact
the dealer for assistance.
• Is the brightness setting set at an appropriate level?
Click the [RESET] button of "BRIGHTNESS".
• Is the brightness setting set at an appropriate level?
Click the [RESET] button of "BRIGHTNESS".
• Is there dust or dirt on the transparent part (over the
lens) of the dome cover (camera shell)?
Clean the transparent part of the dome cover.
• Are objects hard to focus on with the auto focus func-
tion?
Adjust the focus manually.
• When flickers appear frequently, set the shutter speed
to "AUTO" or "1/100".
• Is "ON" selected for "Super Dynamic 3" ?
Set to "OFF".
Reference
pages
Operating
®
6.0 SP2.
Instructions
–
50
Operating
Instructions of
camera
6
6
Operating
Instructions of
camera
6
Page 28 and
Operating
Instructions of
camera
Page 28 and
Operating
Instructions of
camera
55