Panasonic WJNT304 - NETWORK INTERFACE UNIT Network Operating Instructions page 35

Configure the settings relating to the mail notification [Notification]
Click the [Notification] tab on the "Alarm setup" page. ( page 32)
The settings relating to the alarm mail can be configured on this page. To notify of an alarm occurrence by e-mail, it
is necessary to configure the settings of the mail server. ( page 39)
I E-mail notification setup
[To E-mail server setup]
When "To E-mail server setup" is clicked, the [Mail] tab
of the "Server setup" page will be displayed. ( page
39)
[E-mail notification]
Select "ON" or "OFF" to determine whether or not to
notify of an alarm occurrence by e-mail at an alarm
occurrence.
Default setting: OFF
I E-mail notification setup
[Address 1] to [Address 4]
Enter the destination mail address. Up to 4 destination
addresses can be registered.
To notify by e-mail when an alarm occurred, check the
"Alarm" checkbox respective to the desired address.
To delete the registered address, click the [DEL] button
respective to the desired address.
Number of characters that can be entered: 3 - 128
characters
[Mail subject]
Enter the mail subject.
Number of characters that can be entered: 0 - 50
characters
[Mail body]
Enter the mail body.
Number of characters that can be entered: 0 - 200
characters
Note:
By entering "%p%", it is possible to transmit alarm
type and channel information.
35