Configure The Basic Settings Of The Unit [Basic Setup] - Panasonic WJNT304 - NETWORK INTERFACE UNIT Network Operating Instructions

Configure the basic settings of the unit [Basic setup]

The basic settings such as time and date and unit name, and the settings relating to the NTP server and the SD
memory card can be configured on the "Basic setup" page.
The "Basic setup" page has 4 tabs of the [Basic] tab, the [NTP] tab, [SD memory card] tab, and the [RS485 setup]
tab.
Configure the basic settings [Basic]
Click the [Basic] tab on the "Basic setup" page.
The settings such as the unit name, time and date, etc. can be configured on this page.
[Unit title]
Enter the title of the unit. Click the [SET] button after
entering the title of the unit. The entered title will be
displayed in the status display area.
Number of characters that can be entered: 0 - 20
characters
Default setting: WJ-NT304
[Camera title]
Enter the names of the cameras connected to VIDEO IN
connectors. The entered names will be displayed in the
status display area.
Number of characters that can be entered: 0 - 20
characters
Default setting: Name of CH1: WJ-NT304 CH1
Name of CH2: WJ-NT304 CH2
Name of CH3: WJ-NT304 CH3
Name of CH4: WJ-NT304 CH4
[Time & date setup]
Enter the current time and date. When "12-hours" is
selected for "Date/time display format", "AM" or "PM"
can be selected.
Available value: 01/01/2006 00: 00: 00 -
12/31/2035 23: 59: 59
18
[Time display]
Select the time display format from "12-hours", "24-
hours" and "OFF". Enter the current hour reflecting this
setting when entering the current time and date for
"Time & date setup".
Default setting: 12-hours (NTSC model)
24-hours (PAL model)
[Date/time display format]
Select a date/time display format.
When "04/01/2007 13: 10: 00" is set for "Time and date
setup" after selecting "24-hours" for "Date/time display
format", time and date will be displayed as follows
respectively.
DD/MM/YYYY: Apr/01/2007 13: 10
MM/DD/YYYY: Apr/01/2007 13: 10
DD/Mmm/YYYY: Apr/01/2007 13: 10
YYYY/MM/DD: Apr/01/2007 13: 10
Mmm/DD/YYYY: Apr/01/2007 13: 10
Default setting: Mmm/DD/YYYY (NTSC model)
DD/MM/YYYY (PAL model)
[Daylight saving (Summertime)]
Select "ON" or "OFF" to determine whether or not to
apply daylight saving time. Select "ON" or "OFF" to
determine whether or not to apply daylight saving time.
ON: Applies summer time. An asterisk (*) will be dis-
played on the left side of the displayed time and
date.
OFF: Does not apply summer time.
Default setting: OFF