Editing/Deleting Group Dial Destinations - Konica Minolta magicolor 1690MF User Manual

For details on entering/editing text, refer to "Entering Text" on
page A-6.
6
Use the keypad to type in the number (between 1 and 220) for the speed
dial destination to be added to the group, and then press the Select key.
The information registered for the selected speed dial destination
appears.
7
Press the Select key again.
8
To register another speed dial destination, press the + or , key to select
, press the Select key, and then repeat the procedure from step 6.
ADD
9
To finish registering speed dial destinations, press the + or , key to
select
FINISH

Editing/Deleting Group Dial Destinations

Information registered with a group dial destination can be edited or deleted.
1
In the main screen (Scan mode), press the + or , key to select
, and then press the Select key.
ITY
2
Press the + or , key to select
Select key.
3
Press the + or , key to select
key.
4
Use the keypad to type in the number (between 1 and 20) for the group
dial destination to be edited/deleted, and then press the Select key.
The information currently registered for the group dial destination appears
for about two seconds.
5
Press the + or , key to select
delete the destination, and then press the Select key.
If
DELETE
ISTER
6
If desired, edit the group name, and then press the Select key.
For details on entering/editing text, refer to "Entering Text" on
page A-6.
7
Press the + or , key to select
CHECK
then press the Select key.
If
FINISH
REGISTER
6 of "Registering Group Dial Destinations" on page 6-24. If
was selected, continue with step 8.
8
Press the + or , key to select the speed dial destination to be deleted,
and then press the Stop/Reset key.
Scanning With the Machine
, and then press the Select key.
was selected, the settings are deleted, and the
menu appears again.
/ to delete the destination or
EDIT
was selected, the edited settings are saved, and the
menu appears again. If
DIAL REGISTER
, and then press the Select
GROUP DIAL
to edit information or
EDIT
to add a speed dial destination,
ADD
FINISH
was selected, continue with step
ADD
UTIL-
, and then press the
DELETE
DIAL REG-
to finish editing, and
DIAL
/
CHECK EDIT
6-25
to