Editing/Deleting Group Dial Destinations - Konica Minolta magicolor 4695MF User Manual

Editing/Deleting Group Dial Destinations

Information registered with a group dial destination can be edited or deleted.
1
In the main screen (Scan mode), press the + or , key to select
, and then press the Select key.
ITY
2
Press the + or , key to select
Select key.
3
Press the + or , key to select
key.
4
Use the keypad to type in the number (between 1 and 20) for the group
dial destination to be edited/deleted, and then press the Select key.
The information currently registered for the group dial destination appears
for about two seconds.
5
Press the + or , key to select
delete the destination, and then press the Select key.
If
DELETE
ISTER
6
If desired, edit the group name, and then press the Select key.
7
Press the + or , key to select
CHECK
then press the Select key.
If
FINISH
REGISTER
6 of "Registering Group Dial Destinations" on page 193. If
was selected, continue with step 8.
8
Press the + or , key to select the speed dial destination to be deleted,
and then press the Stop/Reset key.
9
Press the + or , key to select
10
After the speed dial destination is deleted, press the Back key.
11
To delete another speed dial destination, repeat the procedure from step
8.
194
was selected, the settings are deleted, and the
menu appears again.
For details on entering/editing text, refer to "Entering Text" on page
325.
/ to delete the destination or
EDIT
was selected, the edited settings are saved, and the
menu appears again. If
To check the settings for the selected speed dial destination, press
the Select key.
DIAL REGISTER
, and then press the Select
GROUP DIAL
to edit information or
EDIT
to add a speed dial destination,
ADD
FINISH
was selected, continue with step
ADD
, and then press the Select key.
Yes
Scanning With the Machine
UTIL-
, and then press the
DELETE
DIAL REG-
to finish editing, and
DIAL
CHECK/EDIT
to