Konica Minolta magicolor 1690MF User Manual page 150

2
Press the + or , key to select
Select key.
3
Press the + or , key to select
Select key.
To search registered names, select
addresses, select
4
Use the keypad to type in the search keyword (maximum of 10 charac-
ters), and then press the Select key.
The search begins, and the search results appear after a while. If no data
matches the search keyword,
onds.
For details on entering/editing text, refer to "Entering Text" on
page A-6.
Text starting with the first character of the maximum 10 characters
is searched for. Text will not be found if the search keyword is in
the middle of a word.
5
Press the + or , key to select the desired data, and then press the Select
key.
To check the found information, press the ) key.
An e-mail address exceeding 64 characters cannot be specified. If
such an e-mail address is specified,
appears for about two seconds, and then the screen for specifying
the destination address appears.
To narrow down the search results, press the Back key, and then
perform step 4 again.
6
Press the Select key again.
7
Press the + or , key to select
To add an additional e-mail address, select
then specify the destination.
To edit the specified e-mail address, select
7, and then continue with step 2 of "Editing a Specified Destination
Address".
To delete a specified e-mail address, select
7, and then continue with step 2 of "Deleting a Specified Destina-
tion Address". The address cannot be edited.
Scanning With the Machine
LDAP SEARCH
or
NAME E-MAIL
NAME
.
E-MAIL
NOT FOUND
, and then press the Select key.
FINISH
, and then press the
, and then press the
. To search e-mail
appears for about two sec-
ADDRESS IS TOO LONG
in step 7, and
ADD
/
CHECK EDIT
/
CHECK EDIT
in step
in step
6-17