Konica Minolta magicolor 1690MF User Manual page 253

This message...
MEMORY FILE FULL
MEMORY FULL
NO NETWORK SETTING
NO SUITABLE PAPER
CHECK DUPLEX SETTING
NO SUITABLE PAPER
LOAD PAPER (xxx)
NOT AVAILABLE
9-42
means...
The maximum num-
ber of image data
files has been
reached.
The machine has
received more data
than can be pro-
cessed with its inter-
nal memory.
The network set-
tings had not been
completely specified
when the machine
was switched to
Scan mode.
Duplex (dou-
ble-sided) printing is
specified, but paper
with a type or size
incompatible with
duplex (dou-
ble-sided) printing is
selected.
Paper suitable for
printing is not
loaded in a paper
tray.
The menu cannot
be set.
Status, Error, and Service Messages
Do this...
Turn the machine off,
and then, after a few
seconds, turn it on
again. Decrease the
amount of data to be
printed (for example,
by decreasing the res-
olution), and then try
printing again.
Turn the machine off,
and then, after a few
seconds, turn it on
again. Decrease the
amount of data to be
printed (for example,
by decreasing the res-
olution), and then try
printing again.
Before scanning in
Scan mode, specify
the network settings in
the NETWORK SET-
TING and E-MAIL
SETTING menus.
Select Letter- or
A4-size plain paper, or
select simplex (sin-
gle-sided) printing, and
then try performing the
print job again.
Load paper suitable for
printing into a paper
tray.
For details on the
menu settings, refer to
"Configuration Menu
Overview" on
page 2-20