Scanning With The Machine; Basic Scanning Operation - Konica Minolta magicolor 1690MF User Manual

Scanning With the Machine

The machine keys can be used to make scans. This operation differs from
scanning from a computer application since the destination of the scan data
can also be specified.
Before scanning, check that the Scan key is lit up in green. If the key
is not lit up in green, press the Scan key to enter Scan mode.
If, while specifying settings, no key is pressed for the length of time
specified for
celed and the main screen (Scan mode) is displayed.
Scanning with the original glass is possible only with A4-, A5-, B5
(JIS)-, Letter- or Statement-size documents.
Scanning with the ADF is possible only with A4-, A5-, B5 (JIS)-,
Legal-, Letter- or Statement-size documents.

Basic Scanning Operation

1
Position the document to be
scanned.
6-8
AUTO PANEL RESET
For details on positioning
the document, refer to
"Placing a document on
the original glass" on
page 3-28 and "Loading
a document into the ADF"
on page 3-29.
, the entered settings are can-
Scanning With the Machine