Changing The Default Font Size - Kyocera KM-2540 Operation Manual

Selecting the Printer Settings
6 Press
Characters displayed before font numbers indicate the following items. For internal font
numbers, refer to Printing Lists of Fonts on page 2-16.
7
Press [Close] and returns to the Font screen.
8
Press [Close] and returns to the Printer menu screen.

Changing the Default Font Size

If you have selected a proportional font as the default font, you can set the font size. If you
have selected the Courier font or the Letter Gothic font as the default font, only the
Character Pitch setting displays.
1
Access Font, refer to Selecting the Default Font on page 2-13.
2
Press [Font selection].
3
Press [Detail].
4 Press [+] or [-] or use the numeric
keys to enter the character size. The
character size can be set between 4
and 999.75 points, in 0.25-point
increments.
5 Press [Close] and returns to the Font screen.
2-14
or to select font ID.
Display
I Internal font
S Downloaded fonts
M Fonts in memory card
H Fonts in RAM disk or hard disk
O Fonts in optional ROM
Description
Font
I000
Font ID
Network USB
Printer menu - Font
Configuration
(4.00 ~ 999.75)
Size 4.00 Point
(0.25)
(0.25)
Printer menu - Font
Back
Courier
Internal
Dark
Detail
Back