Operating The Storage Device; Using The Memory Card - Kyocera KM-2540 Operation Manual

Selecting the Printer Settings

Operating the Storage Device

The machine supports three types of storage device; optional memory card, optional hard
disk, and RAM disk. The optional memory card and optional hard disk are installed into the
dedicated slots of the machine. The RAM disk is an allocated part of the printer's memory.
If the optional hard disk is installed in the machine, the e-MPS function will be available.
The basic operations of each storage device are the same. This section mainly explains
the operation of the memory card.

Using the Memory Card

When the optional Memory Card is installed in this machine, Read, Write and Delete can
be performed for different types of data.
The following options are available:
•
•
•
•
•
Inserting the Memory Card
1 Turn off the main switch.
IMPORTANT: Be sure to turn the main switch off before inserting or removing the Memory
Card.
2 Open the MP (Multi Purpose) Tray.
3
Remove the Memory Card Cover Holder from the
MP tray.
4
Attach the Memory Card Cover Holder to the
memory card.
2-30
Formatting a Memory Card
Writing Data
Reading Data (Data, Program Data, Font Data, and Macro Data)
Deleting Data (Data, Program Data, Font Data, Macro Data, and Option Language)
Printing a List of Data Names (Partitions)