Kyocera KM-2540 Operation Manual page 24

Selecting the Printer Settings
17
Press
press [Change #].
18 Enter the Gateway address using the same procedure used for the IP Address in steps 12
through 14 of IP Address Setting.
19
Press [Close] and returns to the Interface screen.
20
Press [Close] and returns to the Printer menu screen.
NetWare
Set this item to On when you connect to a network using NetWare. Frame mode can be
selected from Auto, 802.3, Ethernet II, 802.2, and 802.3SNAP.
1
Access Interface, refer to TCP/IP on page 2-5.
2
Press
3
Press [On] and select the frame type.
4 Press [Close] and returns to the Interface screen.
5 Press [Close] and returns to the Printer menu screen.
AppleTalk
Set this option to On if connecting to an Apple Macintosh computer.
1
Access Interface, refer to TCP/IP on page 2-5.
2-8
or to select Gateway and
or to select Netware and press [Change #].
Setting Item
DHCP
BOOTP
IP Address
Subnet Mask
Gateway
nterface - Network
NetWare
NetWare Frame Type
Off Auto
On 802.3
EthernetII
Printer menu - Interface - Network
Back Close
Value
Off
Off
192. 1 68 . 110. 204
255. 255. 248. 0
Change #
192. 1 68 . 39. 254
Back
802.2
802.3SNAP