Overriding Difference Between A4 And Letter - Kyocera KM-2540 Operation Manual

2 Press or
and press [Change #].
3 Select the desired output tray and
select [Face down] or [Face up].
4 Press [Close] and returns to the Paper Handling screen.
5
Press [Close] and returns to the Printer menu screen.

Overriding Difference between A4 and Letter

When the Override A4/LT is turned On using the operator panel, the machine ignores the
difference between A4 and Letter paper sizes. Printing is performed without an error
message even if the actual paper size in the current cassette differs from the paper size
formatting the job. By default, this feature is Off.
1
Access Paper Handling, refer to MP Tray Mode on page 2-26.
2
Press or
LT and press [Change #].
3
Press [On] or [Off].
4 Press [Close] and returns to the Paper Handling screen.
5 Press [Close] and returns to the Printer menu screen.
to select Paper Output
to select Override A4/
Selecting the Printer Settings
Paper Handling
Setting Item
Multi Purpose Tray mode Cassette
Feed Select 1st paper
Duplex Mode Off
Paper Output Finisher tray(F down)
Override A4/LT Off
Printer menu
elect
Output
Job
Separator
Top Tray
Finisher Tray
aper Handling
Paper Handling
Setting Item
Cassette
Multi Purpose Tray mode
Feed Select 1st paper
Duplex Mode Off
Paper Output Finisher tray(F down)
Override A4/LT Off
Printer menu
Value
Change #
Back Close
Output Side
Face down
Face up
Value
Change #
2-29