Kyocera KM-2540 Operation Manual page 20

Selecting the Printer Settings
1
2
3
4
5
6
7
8
9
10
2-4
Firmware Version
This item shows the version and release date of the machine firmware.
Hardware Information
This item shows various machine settings for hardware-related items.
Memory
This shows the amount of total memory installed in the machine, the amount of
currently available memory, and the current status of the RAM disk.
Page Information
This shows the print resolution, number of copies, and the total page count.
Installed Options
This item shows the options installed in the machine.
Network Status
This item shows the IP address, subnet mask address, and gateway address for
the network interface card in the machine.
Emulation
This item shows all available emulations of the machine. The PCL6 emulation is
set as default when the machine is shipped from the factory.
Error Log
This item shows the last three instances of the following types of errors, listing
them in the order of occurrence:
• KPDL (PostScript) errors
• Memory overflow
• Print overrun
• File-not-found
The most recent error is displayed on the top line of the Error Log. For error
remedies, refer to Display message on page 3-2. Error information is cleared
when the printer's power is turned off.
Interface Information
This information shows the emulation and the default font for all interfaces
installed in the machine.
Test pattern
KIR is the original smoothing function. This test pattern shows the effect of the
KIR (Kyocera Image Refinement) system.