I/O Shield; I/O Shield Dimensions - Intel BLKD865PERL Technical Product Specification

2.10.2 I/O Shield

The back panel I/O shield for Desktop Board D865PERL must meet specific dimension and
material requirements. Systems based on the Desktop Board D865PERL need the back panel I/O
shield to pass certification testing. Figure 29 show the critical dimensions of the I/O shield for the
Desktop Board D865PERL.
The figure indicates the position of each cutout and gives dimensions in inches to a tolerance of
±0.02 inches. Additional design considerations for I/O shields relative to chassis requirements are
described in the ATX specification. See Section 1.4 for information about the ATX specification.
✏
NOTE
The I/O shield drawings in this document are for reference only. An I/O shield compliant with the
ATX chassis specification 2.03 is available from Intel.
22.45
[0.88]
7.01
[0.28]
0.00
11.81
[0.47]
12.04
[0.474]
12.81
[0.504]
14.40
[0.567]
162.30 Ref
[6.390]
20.00±0.13 TYP
[ 0.79±0.00]
1.00
[0.04]
Figure 29. I/O Shield Dimensions
Technical Reference
1.60±0.13
[0.063±0.005]
8X R0.5 MIN
13.19
[0.519]
0.69
48.00
[0.027]
Ref
11.81
[1.89]
[0.47]
12.31
[0.485]
14.40
[0.567]
Pictorial
View
OM15046
77