Sata/Pata Submenus - Intel BLKD865PERL Technical Product Specification

Intel Desktop Board D865PERL Technical Product Specification
Table 61.

SATA/PATA Submenus

Feature
Drive Installed
Type
Maximum Capacity
LBA/Large Mode
Block Mode
PIO Mode
DMA Mode
S.M.A.R.T.
Cable Detected
Note: If an LS-120 drive is attached to the system, a row entitled ARMD Emulation Type will be displayed in the above
table. The BIOS will always recognize the drive as an ATAPI floppy drive. The ARMD Emulation Type should
always be set to Floppy.
106
Options Description
No options Displays the type of drive installed.
• Auto (default)
Specifies the IDE configuration mode for IDE devices.
• User
User allows capabilities to be changed.
Auto fills-in capabilities from ATA/ATAPI device.
No options Displays the drive capacity.
• Disabled
Displays whether automatic translation mode is
enabled for the hard disk.
• Auto (default)
(This item is read-only unless Type is set to User.)
• Disabled
Displays whether automatic multiple sector data
transfers are enabled.
• Auto (default)
(This item is read-only unless Type is set to User.)
Auto (default) Sets the PIO mode.
0 (This item is read-only unless Type is set to User.)
1
2
3
4
• Auto (default)
Specifies the DMA mode for the drive.
• SWDMA0
Auto = Auto-detected
• SWDMA1
SWDMAn = Single Word DMAn
• SWDMA2
SWDMAn = Multi Word DMAn
• MWDMA0
UDMAn = Ultra DMAn
• MWDMA1
• MWDMA2
(This item is read-only unless Type is set to User.)
• UDMA0
• UDMA1
• UDMA2
• Auto (default)
Enables/disables S.M.A.R.T. (Self-Monitoring, Analysis,
and Reporting Technology).
• Disabled
(This item is read-only unless Type is set to User.)
• Enabled
No options Displays the type of cable connected to the Parallel
ATA IDE interface: 40-conductor or 80-conductor (for
ATA-100 peripherals).