Sata And Pata Submenus - Intel D865PERL Product Manual

Intel Desktop Board D865PERL Product Guide

SATA and PATA Submenus

Main Advanced
` [SATA Port-0
Type
Maximum Capacity
Configuration Options
Selected By BIOS
LBA Mode :
Block Mode :
PIO Mode :
Ultra DMA :
Cable Detected
There are six IDE submenus: Two SATA and four PATA (primary master, primary slave,
secondary master, and secondary slave). Table 23 shows the format of these IDE submenus. For
brevity, only one example is shown.
Table 23.

SATA and PATA Submenus

Feature
Drive Installed
Type
Maximum Capacity None
LBA Mode Control
(Note)
Block Mode
PIO Mode
(Note)
78
Security Power
:
Xxxxxxxxx
[Auto]
[Auto]
[Supported]
16 Sectors
Mode 4
Mode 6
: Serial
Options Description
None
Displays the type of drive installed.
• Auto (default)
Specifies the IDE configuration mode for IDE devices.
• User
Auto fills-in capabilities from ATA/ATAPI device.
User allows capabilities to be changed.
Displays the capacity of the drive.
None
Specifies LBA mode control.
• Disabled
Check the hard disk drive's specifications for optimum
• Auto (default)
setting.
• Auto (default)
Specifies the PIO mode.
• 0
• 1
• 2
• 3
• 4
Boot Exit
]
m o
n p
Enter
F1
P9
F10
ESC
Select Screen
Select Item
Select ` Sub-Menu
General Help
Setup Defaults
Save and Exit
Exit
continued