Sata And Pata Submenus; Primary/Secondary Ide Master/Slave Submenus - Intel D875PBZ - Desktop Board Motherboard Product Manual

Intel Desktop Board D875PBZ Product Guide

SATA and PATA Submenus

Main Advanced
` [SATA Port-0
Type
Maximum Capacity
Configuration Options
Selected By BIOS
LBA Mode :
Block Mode :
PIO Mode :
Ultra DMA :
Cable Detected
There are six IDE submenus: Two SATA and four PATA (primary master, primary slave,
secondary master, and secondary slave). Table 16 shows the format of these IDE submenus. For
brevity, only one example is shown.
Table 16.

Primary/Secondary IDE Master/Slave Submenus

Feature
Drive Installed
Type
Maximum Capacity None
LBA Mode Control
(Note)
Block Mode
PIO Mode
(Note)
66
Security Power
:
Xxxxxxxxx
[Auto]
[Auto]
[Supported]
16 Sectors
Mode 4
Mode 6
: Serial
Options Description
None Displays the type of drive installed.
• Auto (default)
Specifies the IDE configuration mode for IDE devices.
• User
Auto fills-in capabilities from ATA/ATAPI device.
User allows capabilities to be changed.
Displays the capacity of the drive.
None
Specifies LBA mode control.
• Disabled
Check the hard disk drive's specifications for optimum
setting.
• Auto (default)
• Auto (default)
Specifies the PIO mode.
• 0
• 1
• 2
• 3
• 4
Boot Exit
]
m o
n p
Enter
F1
P9
F10
ESC
Select Screen
Select Item
Select ` Sub-Menu
General Help
Setup Defaults
Save and Exit
Exit
continued