Cfm Linktrace Settings - D-Link DGS-3120-24TC Product Manual

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
MEP Name
MEP ID
MD Name
MD Index
MA Name
MA Index
MAC Address
LBMs Number
LBM Payload
Length
LBM Payload
Pattern
LBMs Priority
Click the Apply button to accept the changes made.

CFM Linktrace Settings

To view this window, click OAM > CFM > CFM Linktrace Settings, as shown below:
Figure 10–12 CFM Loopback Settings Window
Description
Select and enter the Maintenance End Point name used.
Select and enter the Maintenance End Point ID used.
Select and enter the Maintenance Domain name used.
Select and enter the Maintenance Domain index used.
Select and enter the Maintenance Association name used.
Select and enter the Maintenance Association index used.
Enter the destination MAC address used here.
Number of LBMs to be sent. The default value is 4.
The payload length of LBM to be sent. The default is 0.
An arbitrary amount of data to be included in a Data TLV, along with an indication
whether the Data TLV is to be included.
The 802.1p priority to be set in the transmitted LBMs. If not specified, it uses the same
priority as CCMs and LTMs sent by the MA.
273