Snmpv6 Host Table Settings (Ei Mode Only); Rmon Settings - D-Link DGS-3120-24TC Product Manual

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide

SNMPv6 Host Table Settings (EI Mode Only)

Users can set up SNMP trap recipients for IPv6.
To view the following window, click Management > SNMP Settings > SNMPv6 Host Table Settings, as show
below:
The fields that can be configured are described below:
Parameter
Host IPv6 Address
User-based Security
Model
Security Level
Community String /
SNMP V3 User Name
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.

RMON Settings

On this page the user can enable or disable remote monitoring (RMON) for the rising and falling alarm trap feature
for the SNMP function on the Switch.
To view the following window, click Management > SNMP Settings > RMON Settings, as show below:
The fields that can be configured are described below:
Parameter
RMON Rising Alarm
3–42 SNMPv6 Host Table Settings
Description
Type the IPv6 address of the remote management station that will serve as the
SNMP host for the Switch.
SNMPv1 – Specifies that SNMP version 1 will be used.
SNMPv2 – Specifies that SNMP version 2 will be used.
SNMPv3 – Specifies that SNMP version 3 will be used.
NoAuthNoPriv – To specify that the SNMP version 3 will be used, with a NoAuth-
NoPriv security level.
AuthNoPriv – To specify that the SNMP version 3 will be used, with an Auth-NoPriv
security level.
AuthPriv – To specify that the SNMP version 3 will be used, with an Auth-Priv security
level.
Type in the community string or SNMP V3 user name as appropriate.
Figure 3–43 RMON Settings window
Description
Enable this option to use the RMON Rising Alarm Trap Feature.
53