D-Link DGS-3120-24TC Product Manual page 28

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide
To add a new user, type in a User Name and New Password and retype the same password in the Confirm New
Password field. Choose the level of privilege (Admin, Operator, Power User or User) from the Access Right drop-
down menu.
Management
Configuration
Network Monitoring
Community Strings and Trap
Stations
Update Firmware and
Configuration Files
System Utilities
Factory Reset
User Account Management
Add/Update/Delete User Accounts
View User Accounts
The fields that can be configured are described below:
Parameter
User Name
Password
Confirm Password
Access Right
Encryption
Click the Apply button to accept the changes made.
NOTICE: In case of lost passwords or password corruption, please refer to the appendix chapter
entitled, "Password Recovery Procedure," which will guide you through the steps necessary to resolve
this issue.
NOTE: The username and password should be less than 16 characters.
Figure 2–22 User Accounts Settings window
Admin
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Description
Enter a new user name for the Switch.
Enter a new password for the Switch.
Re-type in a new password for the Switch.
Specify the access right for this user.
Specifies that encryption will be applied to this account. Option to choose from are Plain
Text, and SHA-1.
Operator Power User
Read/Write– Read/Write–
partly partly
Read/Write Read-only
Read-only Read-only
No No
Read-only Read-only
No No
No No
No No
20
User
No
Read-only
Read-only
No
Read-only
No
No
No