D-Link DGS-3120-24TC Product Manual page 274

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide
Click the Apply button to accept the changes made for each individual section.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
NOTE: The MD Name value should be less than 22 characters.
To add a maintenance association (MA), click on the Add MA button.
After clicking the Add MA button, the following page will appear:
The fields that can be configured are described below:
Parameter
MA
MA Index
VID
Click the Add button to add a new entry based on the information entered.
Click the <<Back button to discard the changes made and return to the previous page.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
Click the MIP Port Table button to view the CFM MIP Table.
Click the Add MEP button to add a Maintenance End Point entry.
After click in the Edit button the following window appears:
Chassis – Transmit sender ID TLV with chassis ID information.
Manage – Transmit sender ID TLV with managed address information.
Chassis Manage – Transmit sender ID TLV with chassis ID information and manage
address information.
Figure 10–2 CFM MA Settings Window
Description
Here the user can enter the maintenance association name.
Here the user can enter the maintenance association index.
VLAN Identifier. Different MA must be associated with different VLANs.
266