Mld Snooping Group - D-Link DGS-3120-24TC Product Manual

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide
Enter a VID (VLAN ID) in the field at the top of the window.
Click the Find button to locate a specific entry based on the information entered.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
NOTE: The abbreviations used on this page are Static Router Port (S), Dynamic Router Port (D)
and Forbidden Router Port (F).

MLD Snooping Group

Users can view MLD Snooping Groups present on the Switch. MLD Snooping is an IPv6 function comparable to
IGMP Snooping for IPv4.
To view the following window, click L2 Features > L2 Multicast Control > MLD Snooping > MLD Snooping
Group, as show below:
The fields that can be configured are described below:
Parameter
VLAN Name
VID List
Port List
Group IPv6 Address
Data Driven
Click the Find button to locate a specific entry based on the information entered.
Click the Clear Data Driven button to delete the specific MLD snooping group which is learned by the Data Driven
feature of the specified VLAN.
Click the View All button to display all the existing entries.
Figure 4–60 MLD Router Port window
Figure 4–61 MLD Snooping Group window
Description
Click the radio button and enter the VLAN name of the multicast group.
Click the radio button and enter a VLAN list of the multicast group.
Specify the port number(s) used to find a multicast group.
Enter the group IPv6 address used here. Select the Data Driven option to enable
the data driven feature for this MLD snooping group.
If Data Drive is selected, only data driven groups will be displayed.
104