D-Link DGS-3120-24TC Product Manual page 213

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide
Figure 8–14 Authentication RADIUS Server Settings window (SI Mode Only)
Figure 8–15 Authentication RADIUS Server Settings window (EI Mode Only)
The fields that can be configured are described below:
Parameter
Index
Server IP (SI Mode Only)
IPv4 Address (EI Mode
Only)
IPv6 Address (EI Mode
Only)
Authentication Port
Accounting Port
Timeout
Retransmit
Key
Description
Choose the desired RADIUS server to configure: 1, 2 or 3 and select the IPv4
Address.
Set the RADIUS server IP address.
Set the RADIUS server IP address.
Set the RADIUS server IPv6 address.
Set the RADIUS authentic server(s) UDP port which is used to transmit
RADIUS data between the Switch and the RADIUS server. The default port is
1812.
Set the RADIUS account server(s) UDP port which is used to transmit RADIUS
accounting statistics between the Switch and the RADIUS server. The default
port is 1813.
Set the RADIUS server age-out, in seconds.
Set the RADIUS server retransmit time, in times.
Set the key the same as that of the RADIUS server.
205