D-Link DGS-3120-24TC Product Manual page 301

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide
Click the View Table link to display the information in a table rather than a line graph.
The fields that can be configured are described below:
Parameter
Unit
Port
Time Interval
Record Number
64
65-127
128-255
256-511
512-1023
1024-1518
Show/Hide
Click the Apply button to accept the changes made for each individual section.
Click the Clear button to clear all statistics counters on this window.
Click the View Table link to display the information in a table rather than a line graph.
Click the View Graphic link to display the information in a line graph rather than a table.
Figure 11–15 RX Size Analysis window (table)
Description
Select the unit you want to configure.
Use the drop-down menu to choose the port that will display statistics.
Select the desired setting between 1s and 60s, where "s" stands for seconds. The
default value is one second.
Select number of times the Switch will be polled between 20 and 200. The default value
is 200.
The total number of packets (including bad packets) received that were 64 octets in
length (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received that were between 65
and 127 octets in length inclusive (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received that were between 128
and 255 octets in length inclusive (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received that were between 256
and 511 octets in length inclusive (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received that were between 512
and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received that were between 1024
and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
Check whether or not to display 64, 65-127, 128-255, 256-511, 512-1023, and 1024-
1518 packets received.
293