D-Link DGS-3120-24TC Product Manual page 229

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
From Port
To Port
Aging Time (1-1440)
State
Idle Time (1-1440)
Block Time (0-300)
Click the Apply button to accept the changes made.
Figure 8–32 WAC Port Settings window
Description
Select the unit you want to configure.
Use this drop-down menu to select the beginning port of a range of ports to be enabled
as WAC ports.
Use this drop-down menu to select the ending port of a range of ports to be enabled as
WAC ports.
This parameter specifies the time period during which an authenticated host will remain
in the authenticated state. Enter a value between 1and 1440 minutes. Tick the Infinite
check box to indicate the authenticated host will never age out on the port. The default
value is 1440 minutes (24 hours).
Use this drop-down menu to enable the configured ports as WAC ports.
If there is no traffic during the Idle Time parameter, the host will be moved back to the
unauthenticated state. Enter a value between 1 and 1440 minutes. Tick the Infinite
check box to indicate the Idle state of the authenticated host on the port will never be
checked. The default value is infinite.
This parameter is the period of time a host will be blocked if it fails to pass
authentication. Enter a value between 0 and 300 seconds. The default value is 60
seconds.
221