Chapter 2 Using The Printer Driver; Selecting Driver Options/Defaults (For Windows) - Epson AcuLaser C3900N User Manual

Chapter 2
Using the Printer Driver

Selecting Driver Options/Defaults (for Windows)

Before you start working with your printer, you are advised to verify/change the default driver
settings. Also, in case you have options installed, you should "declare" the options in the driver.
1. Choose the driver's properties.
2. If you have installed options, proceed with the next step. Otherwise, skip to step 9.
3. Select the Configure tab.
4. Check that the installed options are correctly listed. If not, proceed with the next step. Otherwise,
continue with step 8.
5. Click the Refresh to automatically configure installed options.
Note:
The Refresh is available only if bi-directional communication is available with the printer; otherwise
it is grayed out.
If Windows Vista or Server 2008 is being used, Refresh can also be clicked when the machine is
connected via USB.
6. From the Device Options list, select an option, one at a time, and then select Enable or Disable
from the Settings menu.
Note:
❏ For models with a embedded duplex unit (Epson AcuLaser C3900DN), select EPSON AL-C3900
for Model in the Device Options list.
❏ If Printer Memory is selected, select 256MB or 768MB according to the installed memory. The
factory default setting is 256MB.
❏ This printer does not support CompactFlash cards.
7. Click Apply.
AcuLaser C3900 Series
Using the Printer Driver
User's Guide
20