Memory Direct - Epson AcuLaser C3900N User Manual

Items
CALIBRATI TONE CALIBRATION
ON
AIDC PROCESS
CMYK
DENSITY
COLOR SEPARATION
*1
If EDGE STRENGTH is set to OFF, or ECONOMY PRINT is set to ON, the edges cannot be emphasized.

MEMORY DIRECT

With this menu, settings for "memory direct" function can be specified.
For details on memory direct, refer to "Memory Direct" on page 56.
Note:
❏ This menu appears when an optional hard disk drive is installed, and INTERFACE MENU/MEMORY
DIRECT is set to ENABLE.
❏ This menu does not appear if public user access has not been permitted through authentication
settings. For details on the authentication settings, refer to the Reference Guide.
❏ If SYS DEFAULT MENU/SECURITY/LOCK PANEL is set to ON, the password must be entered in order
for the contents of MEMORY DIRECT to be displayed. For details on LOCK PANEL, refer to "SYS
DEFAULT MENU" on page 46.
Settings (default in bold)/Description
ON/OFF
If ON is selected, image adjustments are applied.
If OFF is selected, image adjustments are not applied.
EXECUTE/CANCEL
If EXECUTE is selected, image adjustments are performed
immediately.
If CANCEL is selected, image adjustments are not performed.
Note:
The AIDC PROCESS function consumes toner.
CYAN/ HIGHLIGH
-3/-2/-1/0/+1/+2/+3
MAGENTA T/
The density of the highlight/middle/shadow color in images
/YELLOW/ MIDDLE/
can be adjusted.
BLACK SHADOW
ON/OFF
If ON is selected, color separation are performed. The
contents of a color page is separated into the color pages for
yellow, magenta, cyan and black, and each is printed with
black gradations as individual pages. The printing order is
yellow, magenta, cyan, then black.
AcuLaser C3900 Series
Printer Control Panel and Configuration Menu
User's Guide
41