Epson AcuLaser C3900N User Manual page 144

This message...
PAPER ERROR
"SIZE"
"MEDIA"
PAPER JAM
DUPLEX1
PAPER JAM
DUPLEX2
PAPER JAM
SECOND TRANS
PAPER JAM
TRAY1
PAPER JAM
TRAY X
PAPER JAM
VERTICAL TRANS
PAPER JAM
FUSER/EXIT
REPLACE TONER
X
TONER MISSING
CHECK X
TRAYX EMPTY
"SIZE"
"MEDIA"
means...
The media size/type set in the
printer driver is different from the
size/type of media loaded
(Appears when PAPER MENU/
PAPER SOURCE/TRAY CHAINING
is set.)
Media has misfed in the duplex.
Media has misfed in the duplex.
Media has misfed in the transfer
roller area. This type of misfeed
means that the media did not
make it to the media exit area.
Media has misfed in Tray 1.
Media has misfed while being
pulled from the specified
tray (Tray 2 or 3).
Media has misfed in the vertical
transfer area.
Media has misfed leaving the
fuser area.
The enclosed toner cartridges
and photoconductor units are
not installed.
The X toner cartridge is
completely empty.
The X toner cartridge is not
installed, or an unapproved
toner cartridge is installed.
The X (Tray 1, 2 or 3) was specified
with the printer driver for
printing, but Tray X is empty. This
message appears when the
PAPER MENU/PAPER SOURCE/
TRAY CHAINING menu is set to
OFF.
AcuLaser C3900 Series
do this...
Load the correct media size and type.
Press the key to display the help
screen. Follow the instructions in the
help screen to remove the misfed
media.
Press the key to display the help
screen. Follow the instructions in the
help screen to remove misfed media.
Be sure to install the enclosed toner
cartridges and photoconductor
units.
Replace the toner cartridge.
Install a correct Epson toner
cartridge.
Load the correct media into the
specified tray.
Troubleshooting
User's Guide
144