Printable Area - Epson AcuLaser C3900N User Manual

Weight
Duplexing
Use special paper that is
❏ Approved for laser printers
DO NOT use special paper that is
❏ Not approved for use as plain paper

Printable Area

The printable area on all media sizes is up to 4.2 mm from the edges of the media.
* Printable Area
Each media size has a specific printable area (the maximum area on which the printer can print clearly
and without distortion).
This area is subject to both hardware limits (the physical media size and the margins required by the
printer) and software constraints (the amount of memory available for the full-page frame buffer).
The printable area for all media sizes is the page size minus 4.2 mm from all edges of the media.
Note:
When printing in color on legal-size media, the following limitations apply.
❏ The printable area is 347.2 mm from the leading edge of the paper. (However, there is a
non-printable area up to 4.2 mm from the leading edge.)
60–90 g/m2
See "Print Media" on page 58 for supported sizes.
a
*
a
a
a
a=4.2 mm
AcuLaser C3900 Series
Media Handling
User's Guide
68