Status, Error, and Service Messages
Status, error, and service messages are displayed in the control panel message window. They provide
information about your printer and help you locate many problems. When the condition associated
with a displayed message has changed, the message is cleared from the window.
Standard Status Messages
This message...
CALIBRATING
CANCELLING JOB
COPYING
ENERGY SAVER
FIRMWARE UPDATE
INITIALIZING
PRINTING
PROCESSING
READY
REBOOTING
WARMING UP
OFFLINE
means...
After replacing a toner cartridge or a
photoconductor unit, or after rebooting
your printer after environmental changes,
your printer automatically pauses to do an
Auto-Image Density Control (AIDC) cycle.
This process is provided to make reliable
printer operation with optimum output
quality possible.
The job is being cancelled.
The printer is printing with the collating
function.
The printer is in Energy Saver mode to
reduce power consumption during periods
of inactivity. When a print job is received,
the printer returns to normal power.
The firmware is being updated.
The printer is being initialized.
The printer is printing.
The printer is processing data.
The printer is on and ready to receive data.
The printer is being restarted.
The printer is warming up.
The printer is offline.
AcuLaser C3900 Series
do this...
No action needed.
No action needed.
No action needed.
No action needed.
No action needed.
No action needed.
No action needed.
No action needed.
No action needed.
No action needed.
No action needed.
To print on a network,
change the TELNET setting
so it is online.
Troubleshooting
User's Guide
140