Chapter 5
Using the Copier
Making Basic Copies
This section contains descriptions of the basic copy operation procedure and the functions that are
frequently used when making copies, such as specifying the zoom ratio and the copy density.
Note:
❏ For AcuLaser CX16NF, before making copies, check that the Copy key is lit up in green. If the key is
not lit up in green, press the Copy key to enter Copy mode.
❏ The default paper size setting can be changed with TRAY1 PAPER SETUP in the UTILITY menu. For
details, refer to "TRAY1 PAPER SETUP Menu" on page 34.
If, while specifying settings, no key is pressed for the length of time specified for AUTO PANEL RESET,
the entered settings are canceled and the main screen (Copy mode) is displayed.
AcuLaser CX16 Series
Printer / Copier / Scanner User's Guide
Using the Copier
77