Epson AcuLaser CX16 User Manual page 193

This message...
MEMORY FULL
NO NETWORK SETTING
NO SUITABLE PAPER
CHECK DUPLEX SETTING
NO SUITABLE PAPER
LOAD PAPER (xxx)
NOT AVAILABLE
NOT E-MAIL ADDRESS
NOT INSTALLED TONER
CHECK x TONER
NON GENUINE TONER
AcuLaser CX16 Series
means...
The machine has received
more data than can be
processed with its internal
memory.
The network settings had not
been completely specified
when the machine was
switched to Scan mode.
Duplex (double-sided)
printing is specified, but paper
with a type or size
incompatible with duplex
(double-sided) printing is
selected.
Paper suitable for printing is
not loaded in a paper tray.
The menu cannot be set.
When the destination for the
scan data was specified, a fax
number registered in the
favorite list or as a speed dial
destination or group dial
destination has been selected.
The indicated toner cartridge
is not installed.
The installed toner cartridge is
not a genuine Epson product.
Printer / Copier / Scanner User's Guide
Do this...
Turn the machine off, and then,
after a few seconds, turn it on
again. Decrease the amount of
data to be printed (for example, by
decreasing the resolution), and
then try printing again.
Before scanning in Scan mode,
specify the network settings in the
NETWORK SETTING and E-MAIL
SETTING menus.
Select Letter- or A4-size plain
paper, or select simplex
(single-sided) printing, and then
try performing the print job again.
Load paper suitable for printing
into a paper tray.
For details on the menu settings,
refer to "Configuration Menu
Overview" on page 32.
Directly type in the destination for
the scan data, or specify an e-mail
address registered in the favorite
list or as a speed dial destination or
group dial destination.
When sending scan data to an FTP
address or SMB address, only one
address can be specified. Delete all
specified destinations, or send the
scan data, then scan again.
Install the indicated toner
cartridge.
Installing a genuine toner cartridge
is recommended.
Troubleshooting 193