Epson AcuLaser CX16 User Manual page 40

LDAP SETTING DISABLE/ENABLE
LDAP SERVER ADDR.
LDAP PORT NO.
SSL SETTING
SEARCH BASE
ATTRIBUTE
SEARCH METHOD
LDAP TIMEOUT
MAX.SEARCH RESULTS
AUTHENTICATION
LDAP ACCOUNT
LDAP PASSWORD
AcuLaser CX16 Series
Setting
Select whether or not to enable the LDAP function.
*4 Specify the address (up to 64 characters) of the LDAP server.
The default setting is "0.0.0.0".
*4 Setting
Specify the port number of the LDAP server.
*4
Setting
Select whether or not to enable SSL.
*4 Specify the search starting point (up to 64 characters) in a
hierarchical structure arranged on the LDAP server.
The default setting is blank.
*4
The conditions for searches can be specified as a name or
e-mail address (up to 32 characters).
The default setting is "cn".
*4 Setting
The specified characters can be searched for at the beginning,
within or at the end.
*4 Setting
Specify the maximum wait time during a search.
*4
Setting
Specify the maximum number of destinations displayed after
a search.
*4
Setting
Select the authentication method used for logging on to the
LDAP server.
*4 Specify the account (up to 64 characters) used to connect to
the LDAP server.
The default setting is blank.
*4 Specify the password (up to 32 characters) used to connect to
the LDAP server.
The default setting is blank.
Printer / Copier / Scanner User's Guide
DISABLE / ENABLE
1 to 65535 (Default: 389)
DISABLE / ENABLE
BEGIN / CONTAIN / END
5 to 300 sec (Default: 60 sec)
5 to 100 (Default: 100)
ANONYMOUS / SIMPLE / DIGEST-MD5 /
GSS-SPNEGO
Control Panel and Configuration Menu 40