Kit Contents; Installing Attachment - Epson AcuLaser CX16 User Manual

Kit Contents

Duplex option
Attachment
Note:
If Tray 2 is installed, it is not necessary to install the attachment. In this case, skip "Installing the
Attachment", and continue with "Installing the Duplex option" on page 203.

Installing Attachment

If the attachment is installed, the duplex option can be installed.
(The attachment cannot be used by itself; it must be used together with the duplex option.)
Note:
Since consumables are installed in the machine, be sure to keep the machine level when moving it in order
to prevent accidental spills.
1. Turn off the machine and disconnect the power cord and interface cables.
2. Remove the dust cover from Tray 1.
Close Tray 1 and the output tray.
AcuLaser CX16 Series Printer / Copier / Scanner User's Guide
Installing Accessories (AcuLaser CX16NF only) 202