Epson AcuLaser CX16 User Manual page 186

Symptom Cause
Image is blurred; One or more of the toner
background is cartridges may be defective.
lightly stained;
The photoconductor unit may
there is insufficient
be defective.
gloss of the
printed image.
The original glass is dirty.
The original cover pad is dirty.
The print or color One or more of the toner
density is uneven. cartridges may be defective or
low.
The photoconductor unit may
be defective.
The machine is not level.
Irregular print or The media is moist from
mottled image humidity.
appears.
Unsupported media (wrong size,
thickness, type, etc.) is being
used.
One or more of the toner
cartridges may be defective.
The photoconductor unit may
be defective.
There is The media is moist from
insufficient fusing humidity.
or the image
Unsupported media (wrong size,
comes off when
thickness, type, etc.) is being
rubbed.
used.
Media type is set incorrectly.
AcuLaser CX16 Series Printer / Copier / Scanner User's Guide
Solution
Remove the toner cartridges and check for damage. If it is
damaged, replace it.
Remove the photoconductor unit and check for damage. If it
is damaged, replace it.
Clean the original glass. For details, refer to "Cleaning the
Machine" on page 134.
Clean the original cover pad. For details, refer to "Cleaning
the Machine" on page 134.
Remove the toner cartridges and check for damage. If it is
damaged, replace it.
Remove the photoconductor unit and check for damage. If it
is damaged, replace it.
Place the machine on a flat, hard, level surface.
Adjust the humidity in the media storage area.
Remove the moist media and replace it with new, dry media.
Use Epson-approved media. See "Print Media" on page 49.
Remove the toner cartridges and check for damage. If it is
damaged, replace it.
Remove the photoconductor unit and check for damage. If it
is damaged, replace it.
Remove the moist media and replace it with new, dry media.
Use Epson-approved media. See "Print Media" on page 49.
When printing envelopes, labels, letterhead, postcards or
thick stock, specify the appropriate media type in the printer
driver.
Troubleshooting 186