Epson AcuLaser CX16 User Manual page 133

Printer/copier/scanner
Hide thumbs Also See for AcuLaser CX16:
Table of Contents

Advertisement

❏ Always close the machine's covers gently. Never subject the machine to vibration.
❏ Do not cover the machine immediately after using it. Turn it off and wait until it cools down.
❏ Do not leave the machine's covers open for any length of time, especially in well-lit places; light
may damage the toner cartridges.
❏ Do not open the machine during printing.
❏ Do not tap media stacks on the machine.
❏ Do not lubricate or disassemble the machine.
❏ Do not tilt the machine.
❏ Do not touch the electrical contacts, gears, or laser devices. Doing so may damage the machine and
cause the print quality to deteriorate.
❏ Keep media in the output tray at a minimum level. If the media is stocked too high, your machine
may experience media misfeeds and excessive media curl.
❏ When lifting the machine, grasp the areas shown in the figure.
Keep the machine level to avoid toner spillage.
❏ Before moving the machine, remove the dust cover, and fold up Tray 1.
❏ If the optional 500-sheet paper cassette unit, attachment and duplex option are installed, remove
them and move them separately.
❏ If you get toner on your skin, wash it off with cool water and a mild soap.
Caution:
c
If you get toner in your eyes, wash it out immediately with cool water and consult a doctor.
❏ Make sure any parts removed during cleaning are replaced before you plug in the machine.
AcuLaser CX16 Series
Printer / Copier / Scanner User's Guide
Maintenance
133

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aculaser cx16nf

Table of Contents