TONER REMAINING
A general estimate of the amount of toner remaining in the toner cartridges can be viewed.
Note:
If the Select key is held down for at least 2 seconds while the screen described above is displayed, the
configuration page will be printed.
T/C CHANGE
REPLACE MODE
EJECT MODE
P/H CLEAN MODE
AcuLaser CX16 Series
Switches the machine to the REPLACE MODE.
This mode is used when replacing a toner cartridge.
For details on replacing a toner cartridge, refer to "Replacing a Toner
Cartridge" on page 119.
Note:
To return to normal operation mode from REPLACE MODE, press the
Stop/Reset key.
Switches the machine to the EJECT MODE.
This mode is used when removing all toner cartridges.
For details on removing all toner cartridges, refer to "Removing All Toner
Cartridges" on page 125.
Note:
To return to normal operation mode from EJECT MODE, press the Stop/
Reset key.
Switches the machine to the P/H CLEAN MODE.
P/H CLEAN MODE is a mode that allows the user to clean the print head
window more easily. The print head window is not cleaned automatically.
For details on cleaning the print head window, refer to "Clearing the Print
Head Window" on page 145.
Note:
To return to normal operation mode from P/H CLEAN MODE, refer to
"Clearing the Print Head Window" on page 145.
Control Panel and Configuration Menu
Printer / Copier / Scanner User's Guide
29