Epson AcuLaser CX16 User Manual page 47

SELECT TRAY
REPORTING Menu (AcuLaser CX16NF only)
Note:
Manufacturer's default settings appear in bold.
ACTIVITY REPORT
TX RESULT REPORT
RX RESULT REPORT
SCAN SETTING Menu (AcuLaser CX16NF only)
Note:
Manufacturer's default settings appear in bold.
AcuLaser CX16 Series
Setting
TRAY1 / TRAY2
Select which paper tray can be used to supply paper when printing received docu-
ments or transmission reports.
Note:
If an optional 500-sheet paper cassette unit is not installed, this setting is not available.
Setting OFF / ON
After every 60 transmissions/receptions, a report can be printed to show the results of
the transmissions/receptions. Select whether the report is printed automatically
when the 60th transmission/reception is reached.
Setting
ON / ON(ERROR) / OFF
Select whether the report showing the result of a transmission is printed automati-
cally after the transmission is finished.
ON: Prints the report after each transmission.
ON(ERROR): Prints the report after a transmission only if an error occurred.
OFF: Does not print the report after each transmission, even if an error has occurred.
The transmission result report is normally printed after a broadcast transmission.
Setting
ON / ON(ERROR) / OFF
Select whether the report showing the result of a reception is printed automatically
after the reception is finished.
ON: Prints the report after each reception.
ON(ERROR): Prints the report after a reception only if an error occurred.
OFF: Does not print the report after each reception, even if an error has occurred.
Printer / Copier / Scanner User's Guide
Control Panel and Configuration Menu 47