Checking the Contents
A
B
C
D
E
F
For EPSON Stylus Pro 9880/9880C/9450 only
For EPSON Stylus Pro 7880/7880C/7450 only
G
For EPSON Stylus Pro 9880/9880C/7880/7880C only
A:
Power cord
B:
Roll paper spindle with the roll paper
C:
Ink cartridges
D:
Roll paper belt
E:
Gray attachments
F:
Paper guides
G:
Black Ink Conversion Kit
Unpacking and Assembling
EPSON Stylus Pro
9880/9880C/9450
Choosing a Place for the Printer
❏ Leave adequate room for easy operation,
maintenance, and ventilation as shown below.
(Values in the illustration below are the
minimum.)
❏ Leave at least 30 cm between the back of the
printer and the wall.
❏ Choose a location that can hold the printer
weight (about 90 kg with base unit).
❏ Make sure the surface is flat and stable.
❏ Use a grounded power outlet; do not use a
damaged or frayed power cord. Avoid using
an outlet that is shared with other appliances.
❏ Use only an outlet that meets the power
requirements of this printer.
❏ Operate the printer under the following
conditions:
Temperature: 10 to 35ºC
Humidity:
20 to 80% without condensation
❏ Avoid locations that are subject to direct
sunlight, excessive heat, moisture, or dust.
❏ Do not block the ventilation openings.
3